Vent-Axia launches new de-centralised mechanical extract air flow unit

Vent-Axia launches new de-centralised mechanical extract ventilation unit

Vent-Axia, the chief in low carbon air flow, has launched the Lo-Carbon NBR dMEV C, a extremely environment friendly de-centralised mechanical extract air flow (dMEV) unit.

Designed for kitchen, utility, rest room and cloakroom functions, the Lo-Carbon NBR dMEV C achieves Constructing Rules with the quietest sound ranges, the bottom variety of put in followers required and probably the most environment friendly followers available on the market.

Developed for housebuilders, it’s been examined to the brand new SAP 10 efficiency requirement and listed within the PCDB with its exceedingly low Particular Fan Energy (SFP) values as impressively low as 0.08 w/l/s and supplies close to silent operation independently examined as little as 7.4 dB(A).

The Lo-Carbon NBR dMEV C achieves its low SFPs and low sound energy ranges via its patent pending air pathway design, which promotes turbulent airflow, permitting for a predictable efficiency curve and making certain efficiency may be met.

Excessive strain improvement and the silent combined move impeller means the Lo-Carbon dMEV C can meet the necessities of many home installations with out the necessity to use a conventional centrifugal fan. That includes a single excessive effectivity EC/DC motor the fan achieves highest in school effectivity due to its axial fan, which consumes a fraction of the vitality of the equal centrifugal fan – drastically lowering Dwelling Emission Charges (DER).

That includes a modern, round unobtrusive design with a multi-orientation grille, offering an ideal slot in any situation, the Lo-Carbon NBR dMEV C is IPX5 rated, permitting set up in Zone 1, 2 and three and presents 100mm and 125mm fashions, with variable pace setting for straightforward set up and commissioning.

The fan’s brand-new management platform supplies absolutely adjustable airflow, which means wholehouse charges may be achieved simply utilizing fewer followers, delivering elevated air flow charges on the lowest sound ranges with the fewest followers. The controls for the NBR dMEV C unit present absolutely adjustable, steady trickle speeds with a lift pace that’s activated through an integral humidistat or through LS Enter.

“The Lo-Carbon NBR dMEV C was designed to obtain new Constructing Regulation air flow charges whereas enhancing indoor air high quality, utilizing the bottom variety of put in followers, and probably the most environment friendly and quietest followers available on the market, ticking all the fitting containers for housebuilders”, explains Joe Tse, Product Supervisor at Vent-Axia. “In the meantime, householders can be pleased with a extremely environment friendly, quiet fan which doesn’t disturb their sleep if the sunshine is turned on through the evening. Installers will admire the convenience of set up and commissioning via its brand-new management platform which supplies absolutely adjustable airflow.”

Designed to supply a extra enjoyable surroundings for the house owner, the Lo-Carbon NBR dMEV C options an optionally available delayed begin. This patented consolation management possibility permits the house owner to get pleasure from a quiet, peaceable rest room for as much as 20 minutes earlier than the enhance prompts.

Moreover, if the sunshine change activates and off inside three minutes, the enhance is not going to activate. No extra disturbing the household if the lavatory mild is turned on through the evening.

Offering simple set up and fast commissioning, the easy-to-use pace adjustment dial ensures operational speeds are met as required by Constructing Regulation Accredited Doc F, whereas the IPX5 score of the NBR dMEV C permits set up flexibility with out the necessity for SELV, making it preferrred for moist rooms of all sizes since it may be put in in Zone 1.

The continual operating, NBR dMEV C vary has a switched reside connection for exterior switches/sensors and harmonised management platform.

The continual operating H mannequin incorporates an ambient response humidistat which will increase the extract price if the humidity rises above the purpose set at set up. The 100mm fan options variable pace settings of 5-26 l/s attaining a minimal noise degree of seven.4 dB(A) at 3 metres whereas the 125mm dMEV C has variable pace settings of 5-35 l/s attaining a minimal noise degree of 8.5 dB(A) at 3 metres.

Vent-Axia’s skilled and educated in-house engineering workforce used state-of-the-art Computation Fluid Dynamics (CFD), to make sure that the decentralised steady mechanical extract fan operates as effectively and as quietly as doable, while additionally offering simple set up and fast commissioning.

For additional info on all services and products supplied by Vent-Axia phone 0844 856 0590 or go to the web site here

Read Previous

Martindale’s new CM Sequence vary of clamp meters

Read Next

Fluke Networks provides reductions on chosen copper and fibre testers

Leave a Reply

Your email address will not be published.

ten − two =

Most Popular